1 Đầu Vòi Phun Nước Tưới Cây 1 ”/ 1.5” / 2 ” tại Lotte Market
Thương hiệu: | Xem thêm Phân bón Thương hiệuMô tả ngắn về 1 Đầu Vòi Phun Nước Tưới Cây 1 ”/ 1.5” / 2 ” tại Lotte Market
Name: Venturi fertilizer Kit. 5”,2” Male Thread. Max water flow rate: 9~20 m³/H. 5 ~ 9. Feature:Controllable, adjustable fertilization, uniform fertilization. Product instructions. When in use, the control valve is closed to form a pressure difference between the front and rear, which can make the water flow through the throat of the Venturi fertilizer injector. When pressurized water enters the: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu 1 Đầu Vòi Phun Nước Tưới Cây 1 ”/ 1.5” / 2 ” tại Lotte Market
Name: Venturi fertilizer KitConnection Size Type: 1”,1.5”,2” Male Thread
Max fertilizer suck rate : 300~1200 L/H
Max water flow rate: 9~20 m³/H
Working Pressure: 0.5 ~ 9.5bar
Model Number: 12381,12382,12383
Feature:Controllable, adjustable fertilization, uniform fertilization
Application:Drip irrigation,Sprinkler irrigation Fertilize
Package:1set
Product instructions
The new Venturi fertilizer injector is installed in parallel with the water supply control valve at the entrance of the irrigation system of the irrigation system. When in use, the control valve is closed to form a pressure difference between the front and rear, which can make the water flow through the throat of the Venturi fertilizer injector. Inside the tube, there is a flow channel guide device, which is designed with two taper nozzles. When pressurized water enters the throat pipe, because the pipe diameter is rapidly reduced, the flow velocity will increase rapidly. When the water flow passes through the inlet pipe opening at the maximum speed, a water jet is generated around the jet water column.
In the negative pressure zone, the fertilizer solution is evenly sucked into the pipeline system from the open fertilizer bucket for fertilization.
When installing, the water flow direction should be consistent with the arrow direction on the fertilizer injector, otherwise it will not
normal work.
The control valve on the main pipe should be able to be adjusted slightly to achieve a proper working state. When installing, make sure that the connection part does not leak, otherwise it will affect the normal operation of the fertilizer injector.