1 Đầu Mài Đá Ngọc Bích Hình Thang Chuyên Dụng tại Lotte Market

Giới thiệu 1 Đầu Mài Đá Ngọc Bích Hình Thang Chuyên Dụng tại Lotte Market

Specification:

1. This product is suitable for carving, engraving, hollowing, etc. on stone carvings, jade carvings and other workpieces. Suitable for engraving glass and ceramics. Brick carving and jade peeling.

2. Clean the flash, burrs, welds, etc. of casting, forging and welding parts.


Tips: When using a diamond tool, please note the following:

1. When you install the new tool, you must try to test whether the tool is beating. If you jump, you can't work directly. You can adjust it to not use it. Otherwise the tool will wear out quickly and the things carved out will not be very smooth. Adjustment method: Use a small wrench to change the high-speed tool holder until the tool is smooth. The electronic machine is strictly prohibited from tapping. The adjustment method is to loosen the chuck, turn the tool at an angle or extend and retract it.

2. It must be cooled by water (similar to the drip device in the hospital). For example, the diamond on the tool head will be graphitized due to overheating, which will quickly wear out and scrap.

3. When drilling, try to avoid shaking, because the shaking will cause partial damage to the tool and accelerate the damage of the entire tool.

4. The speed is as high as possible. The line speed is generally required to be no less than 10-20 meters per second.

5. Light pressure feeding, diamond tools are grinding to process the workpiece, excessive force, the grinding is not easy to eliminate, tools (especially small tools) are also easy to damage.