1 bộ rơ le không dây 4 kênh DC12V 433Mhz điều khiển từ xa cho cửa nhà tại Lotte Market

Giới thiệu 1 bộ rơ le không dây 4 kênh DC12V 433Mhz điều khiển từ xa cho cửa nhà tại Lotte Market

#1Set #DC12V #4 #Channel #Relay #Receiver #Module #Smart #RF #Control #433Mhz #Universal #Wireless #Remote #Control
1Set DC12V 4 Channel Relay Receiver Module Smart RF Control 433Mhz Universal Wireless Remote Control Switch Transmitter for Door Gate
Description:
100% brand new and high quality.
Feature:
It has 4 relays which can make the equipment turn or reverse, on/off and so on come true.
Strong signal which can pass through walls, floors and doors, control receiver from any place within a reliable distance.
The volume is small and the performance is stable and reliable, high receive sensitivity.
It covers application ranging from like auto door, window, lifting equipment, entrance access, to security etc.
It can learn 2272 2262 or 1527 chip with the different code wireless 433MHz remote control.
Easy and convenient to use and operate, practical and useful.

Specifications:
Item Type: Receiver+Transmitter
Working Voltage: DC12V
Button: 4 button
Operating Frequency: 433Mhz
Standby Current: less than 5MA
RF Working Mode: Super heterodyne receiver
Receiver Sensitivity: greater than 98dBm
Remote Control Distance: greater than 100 meter(in open environment)
Support remote control type: Fixed code, learning code
Multiple working modes: Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off
Wiring Method: Fixed wiring terminal
Output: Normally open, Common, Normally closed
Material: ABS+Metal
Size: Receiver: 75x54x28mm/2.9x2.1x1.1in
Color: Black+White
Optional Type: 1 x remote control, 2 x remote control, 3 x remote control, 4 x remote control
Quantity: 1 Set

How to use:
1.Jog/Non-latched: Press one button is working /ON. Loosen your finger on the same button is stop/OFF. One channel switch need one buttons remote control.
2.Self -lock/Self-latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
3.Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
4.Delay: Press remote control's one button, relay is working, release the remote control and begin timekeeping,after 5s/10s/15s will automatically close the relay.

Note:
Transition: 1cm=10mm=0.39inch
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package Includes:
1 x Receiver Module
1 x Protective Shell
1/2/3/4 x Remote Control(Optional)