1 bộ chuyển đổi PS2 RGB-YPbPr sang HDMI cho Sony PS2 RGB/Component tại Lotte Market

Giới thiệu 1 bộ chuyển đổi PS2 RGB-YPbPr sang HDMI cho Sony PS2 RGB/Component tại Lotte Market

INTRODUCTION：
The majority of modern Televisions have connectivity via HDMI-compatible and lack some of the older inputs which retro game consoles use. With the Bitfunx HDMI-compatible adapter cable, you can bring your old PS2 back to life on a newer TV and relive those gaming classics, with a simple ‘PLUG AND PLAY’ solution!
FEATURES：
1)Compatible with PlayStation 2’s from All Regions. Includes Instructions, Power/HDMI- compatible Cables.Video and Audio in Full Digital HDMI-compatible format with zero transmission loss!
2)Built in RGB to YPbPr switch – Only available on the Bitfunx PS2 Adaptor. No more black screens!Provides advanced signal processing with great precision, colours and resolution!
3)Supports all PS2display modes (480i, 480p, PAL 576i).
4)Works with the majority of HDMI-compatible enabled televisions and monitors.
5)Hassle Free! Plug and Play as you go.
6)Small and discreet USB power connector offering greater convenience over a mains socket plug.
SPECIFICATION：
Device Dimensions: L: 6cm W: 4cm H: 1.5cm
Cable Length: 24cm
Power Consumption: Below 2W
Supported Video Input Mode: All PS2 display modes inc. 480i, 480p, PAL 576i
Supported HDMI Output Mode: Bitfunx’s PS2 HDMI-compatible adapter is the first PS2 HDMI-compatible adapter that supports both ‘RGB’ and ‘Component Output’ video modes.
Package includes:
1x HDMI-compatible Converter for PS2
1x High Speed HDMITM Cable
1x Quick Start Guide
1x USB Cable
INSTRUCTIONS SETTING：
1)Remove previous PS2 A/V cable and connect Bitfunx HDMI-compatible adapter.
2)Plug one end of your HDMI-compatible cable into the Bitfunx HDMI-compatible converter, and the other end into a free HDMI-compatible socket on your TV.
3)Select the ‘RGB’ slider on the PS2 HDMI-compatible adapter.
4)Power on your PS2 and TV. Make sure your TV’s A/V INPUT has been switched to the correct HDMI-compatible input where the PS2 is connected.
5)Verify that you can see the PS2 picture on your TV – The Bitfunx HDMI-compatible adapter LED should now be Green in colour.
6)As described and shown above, visit the PS2 configuration menu and change the Component Video Out’setting to:Y Cb/Pb Cr/Pr.
7)Change the slider on the PS2 HDMI-compatible adapter to: YPbPr.
8)If you experience any green screens or distorted images during configuration, it is likely the RGB setting or Component settings are selected with the incorrect output in the PS2 configuration menu.
Please Note:The HDMI-compatible adapter does not upscale or tweak the image. If you are looking for more control over your image, then please consider the OSSC (Open Source Scan Converter)by Bitfunx®.