1 bộ cảm biến dòng chảy nước 1/2” 1-30L/phút cho Arduino tại Lotte Market
Thương hiệu: | Xem thêm Mạch & Bộ phận điện Thương hiệuMô tả ngắn về 1 bộ cảm biến dòng chảy nước 1/2” 1-30L/phút cho Arduino tại Lotte Market
Mainly used for water testing, water cooling system. High amplitude: ≥ 4. Electric strength: 1250V/min. Hydrostatic pressure testing: ≤ 2. 5 5V-24V. Working voltage range: DC 5~18V. Use temperature: ≤ 80°C. Allowing pressure: pressure 2. External threads: 1/2”. Intake diameter: 9mm. Lead-out mode:. Yellow line OUT signal output line. Package included: 1pc x Water Flow Sensor: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu 1 bộ cảm biến dòng chảy nước 1/2” 1-30L/phút cho Arduino tại Lotte Market
Features:Mainly used for water testing, water cooling system
Application: Water heaters, credit card machines, water vending machine, flow measurement device
High amplitude: ≥ 4.6V
Low amplitude: ≤ 0.5V
Electric strength: 1250V/min
Insulation resistance: ≥ 100MΩ
Hydrostatic pressure testing: ≤ 2.0Mpa
Specification:
The lowest rated working voltage: DC4.5 5V-24V
Maximum operating current: 15mA (DC 5V)
Working voltage range: DC 5~18V
Load capacity: ≤ 10mA (DC 5V)
Use temperature: ≤ 80°C
Operating humidity range: 35%~90%RH (no frost)
Allowing pressure: pressure 2.0Mpa
Temperature: -25 ~ +80 °C
External threads: 1/2”
Outer diameter: 20mm
Intake diameter: 9mm
Outlet diameter: 12mm
Lead-out mode:
1. Red Line IN Connects Positive Pole
2. Yellow line OUT signal output line
3. Black line GND cathode
Package included: 1pc x Water Flow Sensor
Note: Please allow 1-5mm difference due to manual measurement.